Weather Makers NYC

NYC's #1 AC Sleeve Installation Experts

AC Sleeve Installation
& Replacement
in NYC

Licensed HVAC technicians providing PTAC sleeve installation, wall AC sleeve replacement, custom sleeve fabrication, and new wall opening cutting across all 5 NYC boroughs. Same-day service available. Licensed & insured with transparent pricing and no hidden fees.

⭐ Serving All NYC Boroughs βœ… Licensed & Insured πŸ† BBB Accredited

    Get a Quote






    πŸ”’ We will get in touch with you shortly.

    Trane PTAC Applied Comfort PTAC Friedrich PTAC Amana PTAC Islandaire PTAC Ice Air PTAC Frigidaire Thru-The-Wall AC Installation Trusted PTAC & Wall AC Brands We Sleeve & Install

    AC Sleeve Installation & Replacement in NYC

    • βœ” Same-Day Service Available
    • βœ” Licensed & Insured
    • βœ” Custom Sizes for NYC Buildings
    • βœ” All Five Boroughs
    πŸ“ž (212) 739-6817
    PTAC Repair in NYC Apartment

    Why Choose Weather Makers NYC?

    • ⭐ 5,000+ Successfully Completed Jobs
    • ⭐ 5-Star Reviews
    • ⭐ Custom Sleeve Fabrication Available
    • ⭐ Certified NYC Wall AC Specialists
    πŸ“ž (212) 739-6817
    10+
    Years in NYC
    3200+
    Sleeves Installed & Replaced
    4.9β˜…
    Average Rating (100+ reviews)
    1-2hr
    Avg. Installation time
    24/7
    Emergency Service Available
    EXPERT AC SLEEVE SERVICE

    Professional AC Sleeve Installation & Replacement in New York City

    πŸ”§

    Weather Makers NYC is a licensed HVAC contractor specializing in AC sleeve installation and replacement across Manhattan, Brooklyn, Queens, the Bronx, and Staten Island. The wall sleeve is the most overlooked and most critical component of any PTAC or thru the wall AC installation.A correctly installed, properly sealed, and accurately sized sleeve is what separates a system that performs perfectly for 15 years from one that leaks water into the wall, loses heat all winter, rattles continuously, and fails prematurely.NYC buildings present unique challenges including pre war brick walls, concrete block structures, and modern drywall systems that each require different installation techniques.Our technicians have installed and replaced over 3000 sleeves using correctly gauged steel, structural framing, weatherproof sealing, and insulated liners that meet NYC building code.We also fabricate custom dimension sleeves for older NYC buildings where standard sizes do not fit.

    Common Reasons NYC Properties Need AC Sleeve Service

    🦺Rusted or Corroded Sleeve

    Steel sleeves corrode from moisture exposure. We replace the sleeve, repair the wall cavity, and reseal completely.

    πŸ’§Water Leaking Through the Wall

    Water infiltration causes mold and damage. We replace and reseal with full documentation for building management.

    🧱New Wall Opening Cutting

    We cut precise openings in brick, concrete, or drywall and install a properly framed and sealed sleeve.

    πŸ“Wrong Size Sleeve for New Unit

    We measure, fabricate, and install the correct sleeve to ensure proper fit and performance.

    πŸ”‡Noise and Vibration

    Loose or incorrect sleeves cause rattling. We install properly sized sleeves with vibration isolation.

    ❄️Heat Loss and Drafts

    We install insulated liners and seal all gaps to eliminate drafts and improve efficiency.

    🏒Custom Sleeve for Older Buildings

    We fabricate custom sleeves for non standard openings in older NYC properties.

    πŸ—οΈNew Construction or Renovation

    We coordinate with contractors to install sleeves correctly before wall finishing.

    AC Sleeve Installation at Your Doorstep All NYC Boroughs

    Same day AC sleeve installation and replacement across all five boroughs.

    WHY WEATHER MAKERS NYC?

    NYC's Most Trusted AC Sleeve Installation Contractor

    When you search "AC sleeve installation NYC" or "PTAC sleeve replacement near me," you need technicians who have worked in hundreds of NYC buildings and can fabricate custom sleeves when standard sizes do not fit.

    ⚑

    Same Day Service All Boroughs

    Call in the morning and have a licensed technician at your property the same day. Our vehicles carry standard PTAC and wall AC sleeve stock so most installations and replacements do not require waiting.

    πŸ†

    10 Plus Years NYC Sleeve Experience

    Over a decade installing sleeves in NYC buildings including pre war brick walk ups, concrete apartment towers, high rise buildings, and brownstones. We understand every wall type and sleeve configuration.

    🧱

    Custom Sleeve Fabrication

    We fabricate custom dimension steel sleeves for older NYC buildings where standard PTAC and wall AC sleeves do not fit. This solves installation problems that most HVAC companies cannot handle.

    πŸ›‘οΈ

    Licensed Insured and Code Compliant

    All installations meet NYC building code requirements. We provide insurance certificates and documentation for co ops, building management, and commercial properties.

    πŸ’§

    Waterproof Exterior Sealing Standard

    Every sleeve installation includes professional exterior sealing. Proper sealing prevents water intrusion, drafts, and long term structural damage.

    πŸ“ž

    24 7 Emergency Service

    Water leaks and sleeve failures require immediate attention. We provide emergency service across all NYC boroughs at any time of day.

    OUR SLEEVE SERVICES

    AC Sleeve Services in NYC

    From standard PTAC sleeve replacement completed same day to custom fabricated sleeves for older NYC buildings we handle sleeve installation and replacement across all boroughs.

    1. PTAC Sleeve
    2. Wall AC Sleeve
    3. Custom Fabrication
    4. Sleeve Replacement

    PTAC Sleeve Installation and Replacement NYC

    Standard PTAC sleeves measure 42 inches wide by 16 inches tall and are used in most NYC apartments and hotels. We install and replace sleeves quickly with proper fit, leveling, and sealing to ensure long term performance.

    • βœ” Standard 42 x 16 PTAC sleeve installation
    • βœ” Custom PTAC sleeve fabrication for non standard sizes
    • βœ” Rusted or corroded sleeve removal and replacement
    • βœ” Proper sleeve leveling for correct drainage
    • βœ” Exterior sealing and weatherproof caulking
    • βœ” Insulated liner installation
    • βœ” Interior trim and finishing
    • βœ” Fit check for new or existing PTAC unit
    πŸ“ž Book PTAC Sleeve Service (212) 739-6817
    Our PTAC Sleeve Installation Process
    1

    On Site Assessment

    We measure the opening and confirm correct sleeve size.

    2

    Sleeve Selection or Fabrication

    Standard or custom sleeve prepared based on your unit and opening.

    3

    Old Sleeve Removal

    Existing sleeve removed carefully without damage to surrounding area.

    4

    Opening Preparation

    Opening cleaned and prepared for proper installation.

    5

    Installation and Leveling

    New sleeve installed with correct tilt and secure fit.

    6

    Sealing and Finishing

    Sealing, insulation, and trim completed before final check.

    Wall AC Sleeve Installation and Replacement NYC

    Thru wall AC sleeves come in multiple sizes depending on the unit. We install correctly sized sleeves to ensure proper airflow, fit, and long term stability.

    • βœ” Standard wall AC sleeve installation
    • βœ” Custom sleeve fabrication for non standard openings
    • βœ” Rusted sleeve replacement
    • βœ” Correct sleeve sizing for new units
    • βœ” Proper drainage tilt setup
    • βœ” Exterior sealing and insulation
    • βœ” Interior trim finishing
    • βœ” Co op and building documentation
    πŸ“ž Book Wall AC Sleeve Service (212) 739-6817
    Matching Sleeve to AC Unit
    βœ“

    Correct Width Selection

    Ensures no air gaps or vibration.

    βœ“

    Proper Depth Fit

    Adjusted based on wall thickness.

    βœ“

    Secure Installation

    Prevents movement and noise issues.

    Custom AC Sleeve Fabrication NYC

    Many NYC buildings have non standard sleeve sizes. We measure and provide custom fabricated sleeves to ensure perfect fit and long term performance.

    • βœ” Exact opening measurement
    • βœ” Custom steel sleeve fabrication
    • βœ” Non standard width and height solutions
    • βœ” Deep wall sleeve solutions
    • βœ” Insulated liner included
    • βœ” Fast turnaround time
    • βœ” Installation included
    πŸ“ž Custom Sleeve Inquiry (212) 739-6817
    When You Need Custom Sleeves
    !

    Non Standard Openings

    !

    Older Buildings

    !

    Improper Previous Installations

    !

    Unit Size Changes

    AC Sleeve Replacement NYC

    If your existing sleeve is rusted, damaged, or improperly installed, replacing it ensures proper performance and prevents future issues like leaks and vibration.

    • βœ” Removal of damaged sleeve
    • βœ” Installation of new properly sized sleeve
    • βœ” Sealing to prevent air leaks and drafts
    • βœ” Noise and vibration reduction
    • βœ” Improved energy efficiency
    πŸ“ž Book Sleeve Replacement (212) 739-6817
    Signs You Need Replacement
    !

    Visible Rust or Damage

    !

    Water Leaks

    !

    Drafts or Air Gaps

    !

    Excessive Noise or Vibration

    BRANDS WE SLEEVE & INSTALL

    AC Brands We Install With Correct Sleeve Sizing

    Every PTAC and thru wall AC brand has specific sleeve dimension requirements. Weather Makers NYC knows the correct sleeve sizing for major brands used in NYC buildings and installs sleeves that fit properly without gaps or vibration.

    β˜…β˜…β˜…β˜…β˜…

    Trane

    PTAC sleeve uses standard 42 x 16 sizing. Common in NYC hotels and apartments. We install compatible sleeves for proper fit and long term performance.

    β˜…β˜…β˜…β˜…β˜…

    Friedrich

    Wall AC sleeve typically 26 inch width. Popular in NYC apartments and co ops. We install sleeves that match Friedrich units for secure fit and correct mounting.

    β˜…β˜…β˜…β˜…β˜…

    Amana

    PTAC sleeve uses standard 42 x 16 size. One of the most common systems in NYC buildings. We provide same day sleeve replacement for most installations.

    β˜…β˜…β˜…β˜…β˜…

    Frigidaire

    Wall AC sleeve sizes typically 26 or 28 inches depending on model. Common in rental apartments. We install correctly sized sleeves for proper airflow and fit.

    β˜…β˜…β˜…β˜…β˜…

    GE

    Standard wall AC sleeve width 26 inches. Found across many NYC apartments. We install compatible sleeves to prevent vibration and air gaps.

    β˜…β˜…β˜…β˜…β˜…

    Islandaire

    Uses non standard sleeve sizes in many NYC buildings. We provide custom sleeve solutions to match Islandaire systems and ensure proper installation.

    42 x 16 PTAC Sleeve NYC
    24 Inch AC Sleeve NYC
    26 Inch AC Sleeve NYC
    28 Inch AC Sleeve NYC
    30 Inch AC Sleeve NYC
    Custom AC Sleeve NYC
    Galvanized Steel Sleeve NYC
    Insulated Sleeve Liner NYC
    PTAC Sleeve Replacement NYC
    Wall AC Sleeve Replacement NYC
    Rusted Sleeve Replacement NYC
    Custom PTAC Sleeve NYC
    Co op AC Sleeve NYC
    Hotel PTAC Sleeve NYC
    Apartment AC Sleeve NYC
    COST INFORMATION

    AC Sleeve Installation Cost in NYC

    Honest, upfront pricing with no hidden fees. Transparent quotes provided before any work begins.

    Typical AC Sleeve Installation Cost in NYC

    ServiceTypical NYC Price Range
    AC Sleeve Installation and Replacement$1000 to $3000+

    Prices vary based on sleeve size, wall condition, floor level, building access, and borough. Exterior sealing is always included in sleeve installation and is not charged separately. Call (212) 739-6817 for a free on site estimate.

    Why Choose Weather Makers NYC

    Trusted by NYC co op boards, building managers, hotel operators, and landlords for clean and professional sleeve installations.

    SAME DAY SERVICE
    • βœ” Licensed and insured NYC HVAC contractors
    • βœ” 10 plus years NYC sleeve installation experience
    • βœ” Custom sleeve solutions for non standard sizes
    • βœ” Exterior sealing included with every job
    • βœ” Co op documentation available
    • βœ” Transparent pricing with written estimate first

    What Happens When a Sleeve Is Installed Incorrectly

    Many repeated AC problems such as water leaks, drafts, noise, and poor performance are caused by incorrect sleeve installation rather than the AC unit itself.

    Water infiltration occurs when the sleeve is not installed with proper outward tilt. Water flows inside instead of outside and causes damage to walls and floors.

    Energy loss happens when gaps or missing insulation allow outside air into the apartment which increases heating and cooling costs.

    Noise and vibration occur when the sleeve does not fit tightly. Even small gaps cause constant rattling during operation.

    Mold develops when moisture enters the wall cavity and remains trapped. This problem will continue until the sleeve is correctly sealed.

    Structural damage can occur over time when water enters the wall and weakens surrounding materials leading to expensive repairs.

    Schedule Sleeve Installation in NYC Today!

    NYC SERVICE AREAS

    AC Sleeve Installation Across All 5 NYC Boroughs

    We serve every ZIP code in New York City with licensed sleeve installation technicians with same day availability and free on site assessments.

    πŸ—½ AC Sleeve Installation Manhattan NYC

    ZIP CODES 10001 to 10282

    Manhattan has a high volume of non standard sleeve situations across apartments, co ops, and commercial buildings. We install and replace sleeves daily with proper sizing, sealing, and documentation.

    Upper East Side Upper West Side Midtown Harlem Chelsea Tribeca SoHo Financial District Greenwich Village Murray Hill Hells Kitchen
    Manhattan Service β†’

    πŸŒ‰ AC Sleeve Installation Brooklyn NYC

    ZIP CODES 11201 to 11239

    Brooklyn properties include brownstones, apartments, and condos with varied sleeve sizes. We provide correct sleeve installation and replacement with proper fit and sealing.

    Park Slope Williamsburg Brooklyn Heights Bushwick Bed Stuy Bay Ridge Flatbush Carroll Gardens Crown Heights Greenpoint Sheepshead Bay
    Brooklyn Service β†’

    🏒 AC Sleeve Installation Queens NYC

    ZIP CODES 11001 to 11697

    Queens buildings often have aging sleeve installations that require replacement. We provide same day sleeve service across all neighborhoods.

    Astoria Long Island City Flushing Jackson Heights Forest Hills Jamaica Bayside Sunnyside Rego Park Howard Beach
    Queens Service β†’

    🏠 AC Sleeve Installation Bronx NYC

    ZIP CODES 10451 to 10475

    Bronx residential buildings have high volumes of PTAC sleeves requiring replacement. We provide reliable same day sleeve installation service.

    Riverdale Fordham Mott Haven Pelham Bay Co op City Kingsbridge Soundview Throgs Neck Morris Park
    Bronx Service β†’

    🌳 AC Sleeve Installation Staten Island

    ZIP CODES 10301 to 10314

    We install and replace sleeves across Staten Island homes and apartments with same day service and proper fitting solutions.

    St George New Dorp Great Kills Tottenville Willowbrook Eltingville Stapleton
    Staten Island Service β†’

    🌿 AC Sleeve Installation Long Island

    Nassau and Suffolk Counties

    We also serve Long Island homes and apartment buildings with the same professional sleeve installation services.

    Hempstead Valley Stream Garden City Levittown Babylon Huntington Mineola
    Long Island Service β†’

    We Serve All NYC Property Types

    🏒

    Co-ops & Condos

    Pre war, post war, and high rise buildings

    🏠

    Brownstones & Townhouses

    Single and multi story NYC homes

    🏨

    Hotels & Hospitality

    PTAC sleeve service for NYC hotel buildings

    🏒

    Apartment Buildings

    Multi unit residential properties

    πŸͺ

    Retail & Commercial

    Offices, shops, and commercial spaces

    CUSTOMER REVIEWS

    What NYC Clients Say About Our AC Sleeve Installation

    Verified reviews from NYC homeowners, co op boards, landlords, and building managers.

    β˜…β˜…β˜…β˜…β˜…
    "Our Upper West Side co op had water coming through the AC sleeve area every time it rained. Three contractors tried fixing it but it kept returning. Weather Makers identified the sleeve was installed at the wrong angle and replaced it correctly. The issue is completely resolved."
    Diane R.
    Co op Board Member, Upper West Side, Manhattan
    β˜…β˜…β˜…β˜…β˜…
    "Needed a custom sleeve for our Park Slope brownstone where no standard size fit. Weather Makers measured it, fabricated a custom sleeve, and installed it within two days. Perfect fit with no vibration and fully sealed."
    James H.
    Homeowner, Park Slope, Brooklyn
    β˜…β˜…β˜…β˜…β˜…
    "Weather Makers replaced all PTAC sleeves in our Astoria apartment building during a full upgrade. They worked efficiently, sealed every unit properly, and provided documentation. No issues since completion."
    Maria L.
    Building Manager, Astoria, Queens
    FREQUENTLY ASKED QUESTIONS

    AC Sleeve Installation NYC FAQ

    Everything NYC homeowners, co op boards, and building managers ask about AC sleeve installation and replacement.

    What is an AC sleeve and why do I need one? β–Ό
    An AC sleeve, also called a wall sleeve or PTAC sleeve, is a metal channel installed through the wall to support and house a thru wall AC or PTAC unit. It provides structural support, drainage, insulation, and proper sealing.
    What size sleeve do I need for my AC unit? β–Ό
    PTAC units typically use a standard 42 by 16 sleeve. Wall AC units usually require 24 inch, 26 inch, 28 inch, or 30 inch sleeves depending on the model.
    Do you provide custom AC sleeves for older NYC buildings? β–Ό
    Yes. Many NYC buildings have non standard openings. We measure and provide custom fabricated sleeves for proper fit.
    How much does AC sleeve installation cost in NYC? β–Ό
    AC sleeve installation and replacement in NYC typically ranges from $1000 to $3000 depending on sleeve size, building type, and installation requirements. We provide free on site estimates before any work begins.
    Why is water leaking through my AC sleeve? β–Ό
    Water leaks are usually caused by improper sleeve angle or poor sealing. Correct installation resolves this permanently.
    My AC unit is rattling. Is that a sleeve issue? β–Ό
    Yes. Rattling is usually caused by an incorrect sleeve size or loose fit. Replacing the sleeve fixes the issue.
    Do I need co op board approval? β–Ό
    Most replacements do not require approval, but documentation is often needed. We provide required documents.
    How long does installation take? β–Ό
    Most installations take 2 to 4 hours. Custom sleeves may take additional time.
    Is a permit required? β–Ό
    Most replacements do not require permits. Requirements vary by building.
    Do you service high rise buildings? β–Ό
    Yes. We work in all NYC building types including high rise properties.
    WHY WEATHER MAKERS NYC?

    Manhattan's Most Trusted HVAC Contractor

    When you search "HVAC repair near me Manhattan" or "AC installation Manhattan NYC," you need a contractor who knows Manhattan buildings inside out β€” not a generic HVAC company that services Manhattan as a side market.

    ⚑

    Same-Day Service All Manhattan Neighborhoods

    Our Manhattan technicians are based in the borough β€” enabling genuine same-day service from Inwood to the Financial District without the travel time that outer-borough contractors charge for.

    πŸ†

    10+ Years Manhattan HVAC Experience

    Over a decade servicing Manhattan's most demanding HVAC environments β€” from 50-story hotel towers in Midtown to 1890s walk-up brownstones in Harlem.

    πŸ—οΈ

    Manhattan Building Specialists

    We handle co-op board approvals, DOB permits, building access logistics, and high-rise service coordination as part of every job β€” not as an extra.

    πŸ’°

    Con Edison Rebates β€” Up to $20,000

    Authorized rebate partner handling all paperwork for heat pump installations in Manhattan apartments, co-ops, and buildings β€” maximum savings, zero hassle.

    πŸ›‘οΈ

    Licensed, Insured & DOB Compliant

    All work meets NYC DOB, mechanical, electrical, and fire code requirements. Full documentation provided for co-op boards and property managers.

    πŸ“ž

    24/7 Emergency HVAC Manhattan

    From late-night PTAC failures to no-heat emergencies in winter, we dispatch immediately to any Manhattan address β€” 24/7, 365 days a year.

    BOOK SERVICE

    Schedule AC Sleeve Installation in NYC Today

    Do not let a rusted or poorly fitted sleeve continue to cause leaks, noise, or drafts in your apartment or building.
    Call (212) 739-6817 or email us to schedule your free on site assessment. Our technicians measure your exact opening, recommend the correct sleeve, and complete installation with proper sealing in most cases on the same visit.

    What to Expect When You Call

    • βœ” Immediate answer by a trained NYC dispatcher available 24 hours
    • βœ” Free on site assessment scheduled within 24 hours
    • βœ” Exact sleeve dimensions measured and confirmed
    • βœ” Text confirmation with technician name and arrival time
    • βœ” Written price before any work begins
    • βœ” Professional installation with full exterior sealing

    Business Hours

    Monday to Sunday 24 Hours

    Emergency Service

    24 hour service across NYC

      Get a Quote






      πŸ”’ We will get in touch with you shortly.

      READY TO GET STARTED?

      Install or Replace Your AC Sleeve in NYC Today

      Same day service. Licensed technicians. Custom fabrication available. Transparent pricing. All five boroughs.

      βœ” No Hidden Fees βœ” Licensed and Insured βœ” All 5 Boroughs βœ” Custom Fabrication βœ” Weatherproofing Included βœ” 10 Plus Years Experience
      Contact us
      ×

      Contact Weather Makers

        Get a Quote