Fujitsu STHP Installation
& Service in NYC
Licensed HVAC technicians specializing in Fujitsu Split Terminal Heat Pump (STHP) installation across Manhattan, Brooklyn, Queens, Bronx & Staten Island. The modern, energy-efficient replacement for aging PTAC systems in NYC apartments, co-ops, condos, and hotels. Same-day consultations. Licensed & insured. All NYC building codes met.
Fujitsu STHP β’ Split Terminal Heat Pump β’ PTAC Replacement
Fujitsu STHP Installation in NYC
- β Same-Day Consultations Available
- β Licensed & EPA-Certified Technicians
- β Apartments, Co-ops, Hotels & Buildings
- β All 5 NYC Boroughs Served
- β PTAC to STHP Conversion Specialists
Why Choose Weather Makers NYC?
- β Fujitsu STHP Certified Specialists
- β 5-Star Google & Yelp Reviews
- β Co-op Board Approval Experience
- β NYC Building Code Compliant Installs
The Modern PTAC Replacement for NYC Buildings
The Fujitsu STHP β Split Terminal Heat Pump β is an inverter-driven heat pump system engineered specifically to replace outdated PTAC and PTHP units in New York City apartments, condos, co-ops, hotels, and multi-family buildings. Unlike a traditional PTAC, which uses a single self-contained compressor mounted in the wall sleeve, the STHP splits the system into a sleek wall-mounted indoor unit and a separate outdoor condensing unit β the same technology used in ductless mini splits, but designed to work within the existing through-wall sleeve and footprint of a standard PTAC installation. The result: up to 58% energy savings, up to 87% quieter operation, dramatically longer lifespan, and inverter technology that maintains consistent room temperature without the on-off cycling that makes PTAC systems uncomfortable and inefficient. Weather Makers NYC specializes in STHP installation across all five NYC boroughs β handling the electrical assessment, sleeve modification or replacement, outdoor unit placement, co-op or building management approvals, and full NYC code compliance for every project. We install the Fujitsu 09LEAS1 and 12LEAS1 models and provide complete post-installation service and repair.
Up to 58% Energy Savings
PTAC units rely on electric resistance heating β one of the least efficient heating methods available. The Fujitsu STHP uses inverter heat pump technology to move heat rather than generate it, delivering up to 58% energy savings over standard PTAC electric heat strips. In NYC, where energy costs are among the highest in the nation, this translates to significant monthly bill reductions for building owners and residents.
Up to 87% Quieter Than PTAC
PTAC compressors are located inside the room β the source of the constant cycling noise in hotel rooms and apartments. The STHP moves the compressor to an external outdoor unit, reducing indoor noise levels by up to 87%. For hotels, quieter rooms directly protect TripAdvisor and Google review scores. For residential buildings, quieter operation significantly improves tenant satisfaction.
Inverter Technology β Consistent Comfort
Traditional PTACs cycle on and off to maintain temperature β the classic PTAC "blast and stop" comfort pattern. Fujitsu STHP inverter technology modulates output continuously, maintaining precise room temperature without cycling. The room reaches the set temperature and stays there β without the temperature fluctuations and drafts of conventional PTAC systems.
2β3x Longer Lifespan
Standard PTAC units in NYC buildings typically last 8 to 12 years under normal maintenance conditions. The Fujitsu STHP is rated for a significantly longer service life β 2 to 3 times longer than most PTAC units β reducing capital replacement costs over the building's lifecycle and lowering per-year HVAC cost substantially.
Smart Controls & BMS Integration
The Fujitsu STHP supports smartphone control via the FGLair app and building automation integration through BACnet and Modbus protocols β compatible with the building management systems used in NYC's modern residential and hospitality properties. This enables zone-by-zone temperature scheduling, remote monitoring, and energy reporting for property managers.
10-Year Parts Warranty
The Fujitsu STHP carries a 10-year parts warranty when properly registered β significantly longer than the standard PTAC parts warranty. This provides building owners and property managers with long-term parts cost protection that standard PTAC systems cannot match.
Cold Climate Performance
NYC winters demand heating performance in sub-freezing temperatures. The Fujitsu STHP is engineered for cold climate operation β maintaining heating efficiency even at low outdoor temperatures. Where standard heat pumps lose efficiency in very cold weather, inverter-driven STHP technology sustains heating output effectively through NYC's winter range.
Designed for NYC Wall Sleeves
The STHP is engineered to install in existing PTAC sleeve openings β minimizing the structural work required for conversion. In many cases, the existing sleeve can be modified rather than replaced entirely, reducing installation cost and building disruption. Weather Makers NYC assesses every installation for sleeve compatibility and determines the most efficient retrofit approach for each property.
Fujitsu STHP vs. Traditional PTAC β Side-by-Side Comparison
| Feature | Traditional PTAC | Fujitsu STHP |
|---|---|---|
| Energy Efficiency | Low (electric resistance) | Up to 58% savings (inverter heat pump) |
| Noise Level | Loud (compressor indoors) | Up to 87% quieter (compressor outdoors) |
| Temperature Control | On/off cycling | Inverter modulation β constant comfort |
| Lifespan | 8β12 years (NYC average) | 2β3x longer (with proper maintenance) |
| Heating Technology | Electric resistance strip | Inverter heat pump (moves heat, doesn't generate) |
| Smart Controls | Basic thermostat | FGLair app + BACnet/Modbus BMS integration |
| Parts Warranty | 1β5 years typical | 10-year parts warranty (when registered) |
| Cold Climate Performance | Degrades in very cold temps | Engineered for cold climate operation |
| Installation Complexity | Simple sleeve replacement | Requires outdoor unit placement + electrical assessment |
| Monthly Energy Cost (NYC avg.) | High | Significantly lower |
NYC's Most Trusted Fujitsu STHP Installer
Installing a Fujitsu STHP in a NYC apartment, co-op, or hotel is fundamentally different from a standard HVAC installation β it requires sleeve assessment, electrical capacity verification, outdoor unit placement approval, building management compliance, and NYC code-specific permitting. Weather Makers NYC has the expertise and track record to manage every one of these steps.
Fujitsu STHP Specialists
We are not a generalist HVAC company that installs STHPs as a side job. Fujitsu STHP installation for NYC apartments, co-ops, condos, and hotels is a core specialty. We understand every aspect of the system β from the 09LEAS1 and 12LEAS1 specifications to the NYC-specific installation requirements for each building type.
NYC Building Expertise
NYC buildings have specific access conditions, co-op board requirements, sleeve constraints, electrical panel configurations, and building code requirements that out-of-state or suburban HVAC companies regularly get wrong. Our team navigates these NYC-specific factors on every installation β correctly the first time.
Co-op & Building Management Approval Support
Co-op boards and building managers require documented approval for any HVAC modification involving the building exterior (outdoor unit placement). Weather Makers NYC provides the complete documentation package β system specs, installation drawings, exterior impact assessment β required for co-op approval submissions.
Same-Day Consultations
We offer same-day site consultations across all five NYC boroughs. During the consultation, we assess sleeve compatibility, outdoor unit placement options, electrical capacity, building management requirements, and provide a written installation estimate on the spot.
Transparent, Upfront Pricing
Written estimate before any work begins. No hidden fees. No surprise electrical upgrade charges after the job is started. We assess and disclose all installation requirements during the consultation β so the price you see is the price you pay.
Licensed, Insured & Code-Compliant
All STHP installations performed by licensed NYC HVAC technicians. Fully insured with insurance certificates available for building managers and co-op boards. NYC mechanical and electrical code compliant on every project.
Fujitsu STHP Services in NYC
New installation, PTAC conversion, repair, diagnostics, and maintenance for Fujitsu STHP systems across all five NYC boroughs.
Fujitsu STHP New Installation NYC
We install Fujitsu STHP systems β the 09LEAS1 and 12LEAS1 models β in NYC apartments, co-ops, condos, hotels, and multi-family buildings. Every installation is preceded by a same-day site consultation covering sleeve compatibility, electrical capacity, outdoor unit placement, building approval requirements, and a written estimate.
- β Fujitsu 09LEAS1 installation (9,000 BTU)
- β Fujitsu 12LEAS1 installation (12,000 BTU)
- β Sleeve assessment and modification
- β Outdoor unit placement
- β Electrical assessment
- β Condensate routing
- β Smart app + BMS setup
- β Full performance verification
Consultation
Same-day site assessment + written estimate.
Approval
Co-op & building documentation handled.
Electrical Prep
Capacity check + upgrades if needed.
Installation
Indoor + outdoor system setup.
Testing
Full heating & cooling verification.
Handover
App setup + owner walkthrough.
PTAC to Fujitsu STHP Conversion NYC
Upgrade aging PTAC units to modern STHP systems with significantly lower energy costs, quieter operation, and longer lifespan. We handle complete PTAC removal and STHP installation.
- β PTAC removal & disposal
- β Sleeve modification or replacement
- β Outdoor unit planning
- β Electrical upgrades
- β STHP installation
- β Energy savings assessment
Aging PTAC
High Energy Bills
Noise Complaints
LL97 Compliance
Fujitsu STHP Repair NYC
Same-day diagnostics and repair for all Fujitsu STHP faults across NYC. We carry common parts for first-visit resolution.
- β Error code diagnosis
- β No cooling / no heating repair
- β Refrigerant issues
- β Inverter board repair
- β Fan motor & compressor diagnosis
- β BMS / app communication issues
Error Code
No Cooling
No Heating
Water Leak
Fujitsu STHP Maintenance NYC
Annual maintenance plans to maintain performance, warranty validity, and energy efficiency for NYC STHP systems.
- β Coil cleaning
- β Filter replacement
- β Drain line cleaning
- β Refrigerant check
- β Electrical inspection
- β Full system testing
Warranty Protection
Lower Energy Costs
Priority Service
Longer Lifespan
Fujitsu STHP Models We Install in NYC
Weather Makers NYC installs and services both Fujitsu STHP models designed for NYC apartment and hotel applications.
Fujitsu STHP 09LEAS1 (9,000 BTU)
The Fujitsu STHP 09LEAS1 is the 9,000 BTU model β ideal for smaller to medium NYC apartments, studio and one-bedroom units, and hotel rooms up to approximately 350 square feet. The 09LEAS1 delivers inverter-driven heating and cooling in a compact configuration designed to replace standard 9,000 BTU PTAC units without significant sleeve modification in most installations. Common in Manhattan co-op studios and one-bedrooms, Brooklyn apartment conversions, and NYC boutique hotel rooms.
Fujitsu STHP 12LEAS1 (12,000 BTU)
The Fujitsu STHP 12LEAS1 is the 12,000 BTU model β suited for larger NYC apartments, two-bedroom units, and hotel rooms up to approximately 500 square feet. The 12LEAS1 provides higher heating and cooling capacity while maintaining the STHP's defining advantages β inverter efficiency, ultra-quiet operation, and the 10-year parts warranty. The most commonly specified model for NYC hotel room retrofits and larger residential PTAC replacement projects.
Fujitsu STHP Installation Cost in NYC
Transparent, upfront pricing with written estimate before any work begins.
| Service | Typical NYC Price Range |
|---|---|
| STHP Site Consultation & Assessment | $190 (Covered in Installation / repair) |
| Fujitsu STHP 09LEAS1 Installation (unit + labor) | $2,800 β $4,500 |
| Fujitsu STHP 12LEAS1 Installation (unit + labor) | $3,200 β $5,200 |
| Sleeve Modification (if required) | $300 β $800 (assessed on-site) |
| Electrical Circuit Upgrade (if required) | $350 β $900 (assessed on-site) |
| Outdoor Unit Mounting Hardware & Installation | Included in installation pricing |
| BMS / BACnet Integration Setup | $200 β $450 per unit |
| Annual Maintenance (per unit) | $150 β $250 |
| STHP Repair Diagnostic Visit | $125 β $200 |
Schedule STHP Installation or Repair in NYC Today!
Fujitsu STHP Installation Across All 5 NYC Boroughs
Licensed STHP installation specialists serving every neighborhood in New York City β same-day consultations available.
π½ STHP Installation Manhattan
Manhattan co-ops, condos, apartment buildings, and hotels are among the most active markets for Fujitsu STHP conversions in NYC. Our technicians navigate Manhattan's building access conditions, co-op board requirements, and sleeve constraints expertly. We serve all Manhattan neighborhoods from Financial District to Inwood.
PTAC Repair β Manhattan Service βπ STHP Installation Brooklyn
Brooklyn's growing luxury residential market and expanding hotel sector are increasingly specifying STHP over PTAC in new installations and retrofits. Weather Makers NYC serves all Brooklyn neighborhoods β Williamsburg, Park Slope, DUMBO, Bed-Stuy, Bay Ridge, and all others.
Brooklyn Service βπ’ STHP Installation Queens
Queens apartments, hotels, and multi-family buildings across Astoria, Long Island City, Flushing, Jackson Heights, Forest Hills, and all other neighborhoods. Same-day STHP consultations available throughout Queens.
Queens Service βπ STHP Installation Bronx
Bronx apartment buildings and hotels served by licensed STHP installation specialists. Same-day consultations across all Bronx neighborhoods.
Bronx Service βπ³ STHP Installation Staten Island
Staten Island residential and commercial properties. PTAC to STHP conversions and new installations with same-day consultation availability.
Staten Island Service βπΏ STHP Installation Long Island
We extend STHP installation services to Nassau and Suffolk County hotels, residential buildings, and commercial properties with the same standards and same-day consultation availability.
Long Island Service βFujitsu STHP for All NYC Property Types
Hotels & Hospitality
Room-by-room PTAC to STHP conversion, BMS integration
Apartment Buildings
Multi-unit installation projects, building management approval support
Co-ops & Condos
Co-op board documentation, NYC code compliance
Senior Living Facilities
Quiet, consistent comfort critical for resident wellbeing
Commercial & Mixed-Use
Office and retail space STHP installation
What NYC Clients Say About Our STHP Installation Service
Verified reviews from NYC co-op owners, building managers, and hotel operators.
Fujitsu STHP NYC β FAQ
Everything NYC property owners, co-op boards, building managers, and hotel operators ask before STHP installation.
Schedule Your Fujitsu STHP Consultation in NYC Today
Ready to upgrade your NYC apartment, co-op, or hotel from PTAC to a Fujitsu Split Terminal Heat Pump?
Call (212) 739-6817 β same-day consultations available across all five boroughs β or submit the form.
Our licensed STHP specialists will assess your property, confirm eligibility, and provide a written installation estimate on the same visit.
What to Expect in Your STHP Consultation
- β Same-day site visit by a licensed STHP specialist
- β Sleeve compatibility assessment
- β Outdoor unit placement options reviewed
- β Electrical capacity check
- β Building approval requirements identified
- β Written installation estimate on the same visit
Consultations Available
Monday to Sunday: 8amβ8pm
Emergency STHP Repair
24/7 immediate dispatch available
Fujitsu STHP Installation in NYC β Book Your Free Consultation
Same-day consultations. Licensed specialists. Written estimate. All five boroughs.